Every film here is measured the same way, so the numbers actually compare. Have a look around. Then tell us about your glass and your budget, and we'll shortlist the two or three worth quoting.
We don't sell a single product line, we match the right brand and film to your glass, orientation and goal.
Filter by the goal a film serves and by brand. A film that does two jobs, like a dark reflective film that cools and hides, appears under both. Open any film for its full specification sheet. Specifying for a project? Every film also has a printable A4 spec sheet.
42 micro-layers tear apart instead of cracking through, security that comes from engineering, not just thickness. Holds glass in place through blasts, forced entry and impact while staying near-invisible at 87% VLT.
Sun control taken to another level. A nano-multilayer film that rejects heat-producing infrared while staying remarkably clear at 70% VLT, comfort and energy savings without darkening the glass.
The thickest clear safety film in the 3M Scotchshield range at 350μm. Three bonded layers deliver the strongest forced-entry and blast-mitigation barrier while keeping glass crystal clear.
Blocks the sun's heat and glare by day, yet a low interior reflectivity keeps your view out clear at night. Strong privacy with none of the mirror-box feeling after dark.
A high-performance silver architectural film, the most efficient sun-control film 3M makes. Built for buildings where heat reduction is the priority, with an abrasion-resistant coating for durability.
A 200μm, two-layer clear film tuned for commercial facades. Strong glass retention against accidents, smash-and-grab and seismic events without altering the look of the glass.
An iridescent dichroic film with blue and purple glints that shift as the viewing angle and light change. A statement treatment for premium interiors, built as 59-micron PET with an 89-micron total construction.
A clear 110-micron film that stops condensation misting the surface. Bathroom mirrors, fridge doors and humid glazing stay readable, inside or out.
A brilliant frosted film that gives clear glass a refined dusted-crystal effect. Elevates partitions and facades aesthetically and adds privacy where it's needed.
A tinted anti-shatter film that pairs glass retention with serious solar performance, 43% heat rejection and strong glare control at a deep 6% VLT.
A metalized silver micro-dot film that rejects 52% of solar energy while the dot pattern keeps the glass readable and transparent. Applies inside or out.
An exterior ceramic film that rejects 71% of infrared and 66% of total solar energy while passing 72% of daylight. The right pick for double-glazed and Low-E units, which take film on the outside face to avoid thermal stress. The faint grey-blue cast all but disappears on the facade.
An exterior IR film in an extra-clear finish that rejects 56% of solar energy while leaving the look of the glass essentially unchanged. Suits every glass type, including double-glazed and Low-E units that need outside application.
A ceramic interior film in a transparent blue tint that blocks 82% of infrared while passing 80% of daylight. Rooms stay bright and views stay natural on both sides of the glass; the heat load drops by 62%.
A one-way mirror built for the evening problem: standard mirror film weakens once inside lights outshine the sky. MDN 500 passes just 1.5% of light, so interior visibility after dark stays far more limited than a standard mirror's. Rooms run darker and lean on artificial lighting. Suited to overlooked ground floors, clinics and executive offices.
A 175μm clear film that steps up tear resistance for higher-risk windows. Improves asset protection and holds shards together during impact and break-in attempts.
A semi-reflective solar film that clings by static with no adhesive, so it lifts off cleanly in winter and goes back up in summer. Practical heat and glare control for rented spaces and seasonal rooms.
An interior IR film with a light golden cast that blocks 55% of infrared and 52% of total solar energy while passing 70% of daylight. Rated for every glass type, laminated and large double-glazed units included, so one film can cover a mixed facade.
A 200-micron PET membrane for large panes over three square metres. It binds the glazing into one integral sheet that resists tearing at 17.5 daN/cm, delays forced entry and holds broken glass in place. Rated 1B1 under NF EN 12600.
A white film that turns any smooth wall or glass into a dry-wipe whiteboard. Write, wipe and reuse, for meeting rooms, classrooms and studios. This is the plain dry-erase version and it is not magnetic, so notes will not hold on it without tape.
The 100μm entry into 3M clear safety film. Adds a durable abrasion-resistant coating and 99% UV rejection, baseline glass retention for homes and offices.
The high-performance one-way mirror: the daylight side sees a mirror, the darker side sees through. Crystal PET at 80 microns for ground-floor offices, meeting rooms and overlooked homes. Mirror privacy holds while outside stays brighter than inside.
The total mirror: 100% silver, reflective on both faces and scratch-resistant. It turns glass into a solid mirror panel for gyms, studios, retail walls and partitions.
An exterior silver film delivering 79% solar rejection, the strongest continuing line in the Reflectiv external range. Crystal PET at 85 microns, suitable for every glass type including large double-glazed units. Built for west-facing facades under full afternoon sun.
A deep 17% VLT in the sputtered Infusion Pro range for glare-heavy facades. Rejects about 79% of solar energy with 100% UV and near-total infrared control in a neutral, low-reflective finish.
Sputtered-nickel film with a porous structure that dries fast and resists oxidation and hydrolysis. The deepest Infusion tint at 20% VLT for the highest heat rejection with a neutral, low-reflective finish.
A balanced 32% VLT in the durable Infusion Pro range, high heat rejection and 100% UV protection with the neutral colour and low reflectivity these sputtered films are known for.
The brightest Infusion Pro at 63% VLT for spaces that need maximum daylight with meaningful heat and 99% UV rejection. Neutral, low-reflectivity finish.
Deep-dyed transparent films that turn clear glass into colour-washed panels for branding, zoning and playful interiors. Five shades are held in Lahore: Vermillon Red 60193, Orange 61052, Mint Green 60894, Ocean Blue 60685 and Violet 60487. Sun-exposed installs belong on single or tempered glass.
A safety film that strengthens glass and rejects heat at the same time, 59% TSER with a clear ceramic tint, holding glass together during impact while keeping interiors cool.
A 125-micron tinted film that strengthens glass and rejects heat together. Holds shards in place on impact while cutting 73% of solar energy at a private 15% VLT.
A gold hexagonal lattice drawn on the lattice screens of traditional architecture. Printed on 23-micron PET for partitions and feature glazing that want warmth and rhythm with light passing through.
The exterior version of the colourless safety membrane, certified 2B2 under NF P78-406 since 2017. It holds panes together after breakage where inside application is not possible.
An embossed static-cling film with a granulated, sandblasted texture you can feel. No adhesive: it grips the glass, repositions and removes cleanly, so it suits rented offices and shops.
An embossed static-cling film with a shattered, broken-glass relief that catches the light. No adhesive, so it repositions and removes cleanly. A dramatic decorative finish for feature glazing and bar fronts.
A full-white frosted film at 80 microns that can be cut and printed for logos, signage and custom privacy patterns. A versatile base for branded glass.
An interior silver-metallized film that rejects 75% of solar energy, strong heat and glare control where the film must go on the inside face. For single, tempered and smaller double-glazed panes.
A colourless 100-micron film that forms an integral membrane over the pane, holding shards in place after breakage. Certified 2B2 under NF EN 12600 and suited to everyday glazing up to three square metres.
Advanced inorganic pigments with cesium and tungsten oxide deliver high heat rejection with low haze and glare. A neutral 30% tint for offices and facades that need cooling without a heavy mirror look.
Nano-ceramic technology milled to ~10nm for exceptional clarity. Rejects essentially all infrared and UV (100%) while keeping a bright 60% VLT, premium heat control that stays clear.
A frosted film with a fine pink glitter for playful, decorative privacy. Office partitions take it as a waist-height band. It also suits salons, boutiques and children's spaces.
A silver reflective film for maximum sun control and privacy at a deep 8% VLT, 80% heat rejection and 100% UV blocking with a mirrored architectural finish.
A white marble-effect film on 23-micron PET that dresses plain glass with a soft, stone-like texture. Decorative privacy for partitions and feature panels of glass.
Fine frosted curves that flow across the glass for a light, elegant privacy pattern. Suits reception glazing, meeting rooms and glass doors.
Designed to strengthen glass without changing its appearance. A thicker, low-haze PET layer and stronger adhesive hold glass together through impacts, accidents and natural disasters, with added UV protection.
A white matt PET film that blocks the view while keeping glass bright. A clean, contemporary privacy finish for offices, clinics and homes.
A frosted PVC film that turns clear glass opaque for privacy on partitions, doors and bathroom glazing. Soft, even light comes through without the view.
A blue translucent jobsite film in 50-micron LDPE that grips by static and protects glass and polished surfaces during construction. It guards against scratches, dust and paint overspray, then removes without residue. A current Reflectiv building line, held in stock.
The current-generation Reflectiv one-way mirror, made in six finishes: Silver 500, Gold 501, Red 502, Blue 503, Green 504 and Bronze 505. Silver passes 7% of visible light; the colour versions suit glazing out of direct sun. Imported per project on order.
A 98% mirror effect on both faces with near-zero light transmission, backed by a hard scratch-resistant surface. It reads as a solid mirror wall from either side. Thicker than MIR 900 at 80 microns of crystal PET. Imported per project on order.
A 2mm translucent stone sheet that glows when backlit, in a Sahara tone. For light boxes, reception desks and feature walls. Priced per sheet; final stock.
A sheet of genuine thin stone reinforced with polyester resin and mounted on double-sided foam tape. Brings natural stone grain to feature panels and lit partitions. Priced per sheet; final stock.
A photochromic film for vehicle glazing, fitted on the inside of the glass. It darkens as sunlight strengthens and goes clear again in shade, so the tint tracks the light through the day. It rejects 92% of infrared and 99% of ultraviolet. This is an automotive film, not an architectural one, and it is fitted and quoted at the studio per vehicle. Reflectiv still lists it; we are not holding stock, so ask us about lead time or a fixed-tint alternative.
An exterior IR film in a grey-blue, extra-clear tint that rejects 62% of solar energy without visibly darkening the glass. Reflectiv has retired this line; we fit remaining stock while it lasts, and IR 80X continues the clear exterior family.
A sputter-metallized exterior silver film rejecting 83% of solar energy, the highest figure we have carried on an external silver. It reflects 68% of solar energy straight off the facade, holding the g-value down to 0.15. Discontinued line; a strong buy while our stock lasts.
An exterior silver film that rejects 59% of solar energy, reflecting 35% back before it reaches the glass. A thicker 115-micron construction with a classic reflective facade finish. Discontinued line; remaining stock installed while it lasts.
An exterior film in metallic grey that rejects 79% of solar energy at a g-value of 0.21. A neutral architectural finish for facades that need serious cooling without a silver mirror look. Discontinued line, available while stock lasts.
The darkest Infusion Pro at 11% VLT for west-facing glass under hard afternoon sun. Rejects around 80% of solar energy with 100% UV and infrared control in a neutral tone.
A light 51% VLT that keeps interiors bright while still rejecting two-thirds of solar energy. Neutral colour, fast drying and excellent durability.
A colourless thick-gauge frost that blocks the view while passing soft light. A clean, everyday privacy frost for doors, partitions and bathrooms. Discontinued and currently out of stock; INT 280 and PVC 215 carry the frosted range forward.
A 115-micron extra-clear film made for digital printing, for full-colour graphics and window branding. Printed to your artwork and applied to the glass. Discontinued line, available while stock lasts.
An interior film in bronze metallic that rejects 72% of solar energy and reflects 37% of it away. Warm daytime privacy and glare control with a classic bronze facade tone. Discontinued line, installed while stock lasts.
A 28% VLT ceramic film with near-total infrared and UV rejection. Cuts solar heat hard while keeping a clean, low-reflective finish for facades and living spaces.
A 52% VLT ceramic film that balances daylight and heat control for offices and homes. High UV protection and low glare without a heavy or reflective look.
A clear 67% VLT nano-ceramic film for rooms that must stay bright. Steady heat rejection with 100% UV protection and low haze, so daylight and views stay natural.
A very clear 74% VLT ceramic film for spaces that must stay bright, solid heat rejection and 99% UV protection with almost no change to the daylight coming in.
A graduated film that fades from frosted to clear up the glass. Privacy sits at eye level while daylight and a sense of openness stay at the top. Discontinued pattern, available while stock lasts.
Evenly spaced 13mm white stripes on 23-micron PET for glass manifestation and light privacy. A clean way to mark glass doors and meeting rooms so people see the surface. Discontinued pattern, available while stock lasts.
White 3D triangles that add depth and movement to glass partitions in offices and retail. Discontinued pattern; we install remaining stock while it lasts.
Irregular white curves flowing across a clear base, installable vertically or horizontally to suit the pane. Elegant manifestation and light privacy for meeting rooms and entrances. Discontinued pattern, available while stock lasts.
A reusable 90-micron PVC film that grips by static, no adhesive, and shields finished glass during fit-out and handover. It also protects glass and acrylic panes in transit. Applied dry, inside or out, then peels away clean and goes back on the next job. Discontinued and currently out of stock.
All 42 performance films in one sortable table. Rank them by solar heat rejection, visible light, UV or warranty.