Reflectiv INT 115 Gradientdecorative window film

Decorative film from Reflectiv

A graduated film that fades from frosted to clear up the glass. Privacy sits at eye level while daylight and a sense of openness stay at the top. Discontinued pattern, available while stock lasts.

INT 115 is a graduated frost. Instead of a hard line between frosted and clear, the pattern fades: solid at the bottom, thinning upward until the glass is open again. It sits in Reflectiv's degressive range, the films built to put privacy where people are and daylight where they are not.

The geometry is fixed and worth knowing before anything is cut. The film carries a full, solid band 60 centimetres deep with the fade running above it, on a roll 1.52 metres tall. That decides where the private zone lands on the glass, so the drop is planned from the sill upward rather than from the head down.

Construction is Reflectiv's standard patterned build: 23 microns of PET with a 13 g/m2 acrylic adhesive on a siliconed PET liner, fitted to the inside face with the glass above 5 degrees, rated Euroclass B-s1, d0. Rolls come in 2.5, 5, 10 and 30 metre lengths. Reflectiv rates its patterned range for glazing that is not in direct sun.

Which glass it suits

INT 115 is an inside-face film for ordinary clear glass, and being a thin patterned PET it asks nothing of the glazing beyond a clean, flat surface. The real constraint is geometric rather than technical. The 60 centimetre solid band and the fade above it are fixed in the roll, so the film is specified to the pane height instead of trimmed to taste. Reflectiv specifies the patterned range for glazing out of direct sun.

Specifications

Figures are nominal and provided for comparison. Your specialist confirms the final specification and suitability for your glass on a site survey.