Reflectiv INT 280 White Dusteddecorative window film

Decorative film from Reflectiv

A full-white frosted film at 80 microns that can be cut and printed for logos, signage and custom privacy patterns. A versatile base for branded glass.

INT 280 is the working frost of the range: an 80 micron white PVC that fully hides the view while keeping the room bright. It is also the practical one. It applies dry and bubble free, so partitions can be filmed in occupied offices without wet mess, and it is rated for internal and external faces alike.

It runs wider than most decorative rolls at 1.37 metres, in lengths from 2.5 up to 50 metres. Thermal tolerance is minus 40 to plus 90°C, fire behaviour Euroclass B-S1,d0, REACH and RoHS compliant, with a five year warranty on glazing out of direct sun and 12 to 15 years of quoted durability in central Europe.

Being a full white surface, it doubles as a base for branding: logos, signage and custom privacy patterns can be cut or printed into it before fitting. Where a softer, partial screen is wanted, the dusted and gradient INT patterns take over; INT 280 is for when the view must actually stop.

Which glass it suits

INT 280 applies dry to the inside or outside face of any normal clear glass, with a compatibility test before polycarbonate. It wipes clean from thirty days after fitting, non-abrasive and ammonia-free. Note the 1.37 metre roll width when planning seams on wide panes.

Specifications

Figures are nominal and provided for comparison. Your specialist confirms the final specification and suitability for your glass on a site survey.