Decorative film from Reflectiv
A white film that turns any smooth wall or glass into a dry-wipe whiteboard. Write, wipe and reuse, for meeting rooms, classrooms and studios. This is the plain dry-erase version and it is not magnetic, so notes will not hold on it without tape.
WHB 232 turns any smooth flat surface into a dry-erase whiteboard: write with ordinary erasable markers, wipe, and go again. It is an adhesive white coating made for writing directly on walls and glass, so a meeting room wall or a partition becomes the working surface instead of hanging a board on it.
The manufacturer's sheet is dated 2026 and current: designed for every type of glazing, certified to the European EN 13501 fire standard with a Euroclass rating for interior use, and quoted at 12 to 15 years of durability in central Europe. Rolls are 1.2 metres wide in 10 or 30 metre lengths, which sets the height of a wall written in one band.
Practicalities: the surface underneath must be flat, clean and grease-free; polycarbonate wants a compatibility test; and cleaning starts thirty days after fitting, non-abrasive only. Erasable markers wipe off cleanly; a permanent marker is the one real enemy, so it suits rooms with their own marker discipline.
Which glass it suits
WHB 232 is wet-applied to interior walls and glass alike, onto a flat, spotless surface. On glass partitions it doubles as a privacy layer, white and opaque. Plan around the 1.2 metre roll width: one clean horizontal band writes better than two seamed ones.
Specifications
| Thickness | 75 μm PVC |
|---|---|
| Width | 120 cm |
| Roll Lengths | 10 m or 30 m |
| Effect | Dry-erase whiteboard |
| Magnetic | No |
| Durability | 12 to 15 years (mfr, Central Europe) |
| Fire Rating | EN 13501 / Euroclass certified |
| Application | Internal, wet application |
Figures are nominal and provided for comparison. Your specialist confirms the final specification and suitability for your glass on a site survey.